Part Number Hot Search : 
154807 ST72321 TSHG6210 C1165 LT1676 D401A DIP05 B3701
Product Description
Full Text Search
 

To Download PD40-10 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 40 WATT DC TO DC CONVERTERS
DESCRIPTION
The PD40 series of DC/DC converters provide up to 40 watts of continuous output power. Available in three standard input ranges of 10-30 VDC, 20-60 VDC and 30-90 VDC, they are ideal for a variety of applications including telecoms, process control, portable equipment and vehicle mounted instrumentation. All units are available in compact "open PCB" or "enclosed" mechanical formats.
PD40 SERIES
F E ATU R E S
Low cost Small size, light weight 100 burn-in Overvoltage protection Overcurrent protection Three wide input ranges: 10-30 VDC, 20-60 VDC and 30-90 VDC
I N P U T S P E C I F I C ATI O N S
Input voltage 10 to 30 VDC PD40 "L" series 20 to 60 VDC PD40 "M" series 30 to 90 VDC PD40 "H" series 2.5A rms for 24 VDC 1.3A rms for 48 VDC 0.84A rms for 72 VDC
E N V I R O N M E N TA L S P E C I F I C ATI O N S
Operating temperature St o r a g e t e m p e r a t u r e Relative humidity Derating 0 to +70 -40 to +85 5 to 95 non-condensing Derate from 100 at +50 linearly to 50 at +70
Input current
OUTPUT SPECIFICATIONS
Output voltage/current Total output power Ripple and noise Overvoltage protection See rating chart 40 watts maximum 1 peak to peak max. set at 112 - 132 of its nominal output voltage All outputs protected to short circuit conditions All outputs 0.04 / maximum Maximum excursion of 4 or better on all models, recovering to 1 of final value within 500us after a 25 step load change
GENERAL SPECIFICATIONS
Switching frequency Efficiency Line regulation Withstand voltage 36KHz 5KHz 70 minimum at full load 0.5 maximum at full load 1000VDC from input to output 600,000 hours minimum at full load at 25 ambient, calculated per MIL-HDBK-217F
Overcurrent protection
MTBF
Temperature coefficient
Transient response
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 sales@trumpower.com www.TRUMPower.com
DC TO DC CONVERTERS
OUTPUT VOLTAGE/CURRENT RATING CHART
PD40 SERIES
Maximum (1)(2) Output #1 Output #2 Output #3 Output Model Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Power(3) PD40-10 5V 0A 8.0A 2% (N/A) (N/A) 40W PD40-12 12V 0A 3.5A 1% (N/A) (N/A) 40W PD40-13 15V 0A 3.0A 1% (N/A) (N/A) 40W PD40-14 24V 0A 2.0A 1% (N/A) (N/A) 40W PD40-23 +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% (N/A) 40W PD40-24 +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% (N/A) 40W PD40-25 +5V 0.5A 3.0A 3% +24V 0.1A 1A 5% (N/A) 40W PD40-30 +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% -5V 0A 0.8A 5% 40W PD40-31 +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% -12V 0A 0.8A 5% 40W PD40-32 +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% -15V 0A 0.8A 5% 40W PD40-33 +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% -12V 0A 0.8A 5% 40W PD40-39 +5V 0.5A 3.0A 3% +24V 0.1A 1A 5% -12V 0A 0.8A 5% 40W Notes: (1) All multi-output units may be operated at no-load without damage. At no-load, output tolerance increases to 10%. (2) Suffix codes for mechanical format and input range are as follows. PD40-XXYZ; "XX" is the model code from the above table, "Y" is the input range (L=10-30 VDC, M=20-60 VDC, H=30-90 VDC) and "Z" is the mechanical format (A=open PCB, B=L-bracket, C=enclosed), e.g. PD40-31MC (20-60 VDC input range, enclosed). (3) "L" series is suitable only for 75% of the above stated maximum output power.
MECHANICAL SPECIFICATIONS
NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector mates with Molex housing 09-50-3041 and Molex 2878 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3061 and Molex 2878 series crimp terminal. 5. Weight: 220 grams approx. (PCB format) 6. See the mechanical details of L-bracket and enclosed formats in page 7-1.
PIN CHART PIN MODEL PD40-10 PD40-13 PD40-23 PD40-25 PD40-30 PD40-32 PD40-39 PD40-12 PD40-14 PD40-24 PD40-31 PD40-33
1 2 3 4 5 6
OUTPUT #1 OUTPUT #2 OUTPUT #2
OUTPUT #1 OUTPUT #1 OUTPUT #1
OUTPUT #1 OUTPUT #1 OUTPUT #1
RETURN COMMON RETURN COMMON RETURN
RETURN COMMON RETURN COMMON RETURN
RETURN N.C. OUTPUT #3
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 sales@trumpower.com www.TRUMPower.com


▲Up To Search▲   

 
Price & Availability of PD40-10

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X